Gum Removal is one of the jobs we do most often in Wimberley, TX. Typical jobs cost $200-$1,000, and you approve the price before we begin.
How we clean it
When to book gum removal
- Black dots across entrances and walkways
- Gum on steps and near benches
Where the grime comes from
- Foot traffic
- Gum hardening and collecting dirt
What you can do yourself
- Scrape fresh gum before it gets ground in
- Put bins near entrances
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
What can go wrong with DIY pressure washing
- Cold-water pressure alone smears gum and etches the concrete
- Chemical removers that stain
Our process for gum removal
- Survey the area
- Soften gum with hot water or steam
- Remove it with a surface cleaner and detail tools
- Clean the surrounding area for an even look
- Schedule maintenance visits if needed
How much does gum removal cost?
What moves the price:
- Area and number of buildings
- Scheduling: early-morning, overnight or weekend work
- Whether wash water has to be recovered under local stormwater rules
- Frequency: recurring service is usually priced lower per visit
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Serving Wimberley, TX and nearby towns
In Texas, commercial buildings and sidewalks often need cleaning several times a year, because mildew, gum and grime build up quickly in the heat.
Parts of Texas are exposed to hurricanes and tropical storms. After a storm, washing removes mud, debris and salt spray from siding, screens and walkways. Check for damage first: loose siding, broken screens and roof damage need repair before anyone washes them.
Near the coast, salt air leaves a film on siding, windows, screens and railings that dulls finishes and speeds up corrosion on metal. Regular rinsing and washing help protect them.
Some cities in Texas limit outdoor water use, including washing hard surfaces with a hose, especially during drought declarations. Pressure washers use far less water than an open garden hose, but rules vary, so it's worth checking your city's current restrictions. Wash water should also be kept out of storm drains.
Besides Wimberley (ZIP code 78676), we handle gum removal in San Marcos (12.3 mi), Canyon Lake (12.9 mi), Kyle (13.3 mi) and Dripping Springs (13.3 mi). Call (555) 010-0000 for a free quote in Wimberley.
Gum Removal: frequently asked questions
How much does gum removal cost in Wimberley, TX?
Gum Removal typically costs $200-$1,000 depending on the area and how much gum there is, and usually takes 2-6 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.
Do you use high pressure for gum removal?
Gum Removal is usually done with hot-water pressure wash, with the pressure adjusted for each surface. Delicate surfaces nearby, such as siding, windows and plants, are protected or cleaned with lower pressure.
Is gum removal safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule gum removal?
Every few months for busy entrances. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.